The correct step controller for the Kwikee 25 Series Electric RV Steps - 12V motor item # LC369506 is the Replacement Control Unit for Kwikee Electric RV Steps item # LC379146. view full answer...
Yes, the Timbren Rear Suspension Enhancement # TFRF53A contains 2 add on springs. You will get one spring for each side of your 2016 Forest River FR3 30DS.
You will need to raise the rear axle of your FR3 slightly off the ground to install these as per the instructions that I have linked below. view full answer...
While we would not have any way to know for sure it is unlikely there is going to be wiring run.
In order to install the MaxxAir MaxxFan Trailer Roof Vent # MA00-06200K you would need to use Primary Wire - 16 Gauge # DW02359-1 to run wire to a 12V power source.
This vent is designed to fit standard RV roof openings of 14” x 14” and a minimum roof thickness of 1-1/8” to a maximum of 6-1/2”; it will also require the use of Sealant # 0160297 to ensure a tight bond between the flange and roof. view full answer...
I reached out to my contact at Timbren and this is something that is not all that uncommon.
If the brake lines on the axle of your 2013 F53 Chassis are underneath the Timbren Rear Suspension Enhancement # TFRF53A you can carefully bend them out of the way so they will not be underneath the spring when it contacts the axle.
There is not a replacement clip set that will secure the lines in the new location so if the lines are pretty stiff and out of the way using no clips is fine, or you... view full answer...
The biggest improvement you can make for the ride quality of your 2020 Forest River FR3 34DS that has a 20,500 lb GVWR is with a rear sway bar. For that you'd want the part # RM-1139-145. This will get rid of that boat feeling you described and will require much less steering corrections. Out of all of the suspension upgrades you can make to your motorhome this will give you the biggest improvement. view full answer...
As long as your current switch magnet has the small rectangular shape that part # LC369299 has it will fit as a replacement for your steps whether they are 24 or 32 series Kwikee steps. I confirmed this with my contact at Lippert. view full answer...
Yes, the correct Roadmaster Reflex Steering Stabilizer for your 2018 Forest River FR3 29DS is part # RM-RBK22-RSSA. I have attached a sample install video for you as well. view full answer...
For your 2019 Forest River FR3 29DS that has the 18,000 lb GVWR the SumoSprings kit you'd want is the part # SSF-170-40-2 for the front and for the back # SSR-187-40-1. I attached install videos for both of these for you to check out as well.
These will greatly improve the ride quality and also reduce sway which will make driving the motorhome much more enjoyable. view full answer...
For your 2015 Forest River FR3 25DS that has a 16k GVWR we have an upgraded rear sway bar that will make a huge difference with the Roadmaster # RM-1139-146. Of all of the suspension upgrades you can make to a motorhome the upgraded rear bar makes the biggest improvement in handling and driver fatigue.
Then for a steering stabilizer to help keep get rid of wander and improve steering response you'd want the Roadmaster Exact Center part # RM36RR and you'd be set. view full answer...
I checked with SuperSprings and the SumoSprings Rebel Custom Helper Springs part # SSF-170-40-2 are a fit for the front of a 2020 Forest River FR3 Motorhome as they are designed for a 16,000 lb to 22,000 lb GVWR which your 18,000 lb GVWR falls between.
The correct rear ones you should be using are the SumoSprings Maxim Custom Helper Springs part # SSR-187-40-1. view full answer...
The best option we can offer you is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41991-16 which has a 16,000 lb weight capacity. In order to install this hitch you will need to have it either bolted or welded to the frame. We do not offer any custom fit trailer hitch options for this motorhome which is why you will need to bolt or weld the above on. view full answer...
I was not able to find anything relating to that part number. I was able to find the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding # SR86ZR which is 180" so you'd have to trim this down a bit, but this could potentially work for you.
If the track your current seal sits in is 1/2" wide, then this seal will work as a replacement. If not, let me know some dimensions of your current seal and I'll see if we have something you can use. view full answer...
We unfortunately do not have a direct replacement for your Dometic Weather Pro Awning and roller bars are not universal, so the only available solution is for you to upgrade your awning with Solera Smart Arm 12V Power RV Awning # LC405510.
This is a fantastic upgrade to your current Dometic awning, measures 18' wide, a built in automatic rain dump to drain pooling water, and is easily operated by the built in waterproof touchpad. view full answer...
I have a solution for you, but the Lets Go Aero BikeWing-2 NextGen 2-Bike Rack you are referring to has a weight capacity of 40lbs per bike, which would not be sufficient for an electric bike weighing 65lbs. Instead, I would look into the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY74FR which has a weight capacity of 80lbs per bike and is compatible with motorhomes that have 1-1/4" or 2" trailer hitch receivers.
Keep in mind, since your radrunner 1 seems to be a... view full answer...
Yes, the Replacement Controlled Motion Hinge for RV Entry Door # LC95VR can be used to upgrade the hinges on your Lippert entry door and be used in place of the gas strut.
To be effective you only have to replace one hinge of your RV entry door with the Replacement Controlled Motion Hinge for RV Entry Door # LC95VR. view full answer...
For your 2016 Forest River FR3 Motorhome, the Rear Anti-Sway Bar # RM-1139-146 is the best fit for your 18K motorhome. The # RM-1139-149 is the correct fit for vehicles between 22K and 26K. The Rear Anti-Sway is the first step I recommend to give you a better ride and reduce sway.
The Roadmaster Front Anti-Sway Bar for Motorhomes # RM-1139-148 is the correct fit and will further assist with the effects of crosswinds, passing motorists and shifting cargo. The front anti-sway is the second... view full answer...
Yes we do. We have the VueSMART RV and Trailer Backup Camera # HM34FR which will mount to the rear of the camper and can display on an iOS device like an iPad. view full answer...
The Dexter E-Z Flex Suspension Kit # K71-653-00 should be about a 3 hour installation for someone who knows that they're doing and has the right tools. Long for someone who is new to the task, possibly shorter for someone really familiar with this system.
Attached is a review and installation video for you to check out! view full answer...
Since your 2021 Forest River FR3 30DS is built on a Ford F-53 chassis that has an 18k GVWR the correct rear sway bar would be the # RM25VR which is a 1-3/4 inch diameter sway bar. view full answer...
I found a forum online where a guy with your exact RV and suspension modifications who had the same problem and they fixed it by loosening the sway bar attachment hardware and then re-torquing them with the RV level and the problem went away. view full answer...